Ryobi HJP003 User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
12 VOLT COMPACT DRILL-DRIVER
12 V PERCEUSE-TOURNEVIS COMPACTE
TALADRO-DESTORNILLADOR COMPACTO DE 12 V
HJP003
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT : Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
TABLE OF CONTENTS
 General Power Tool
Safety Warnings ..............................2-3
 Drill-Driver Safety Warnings ...............3
Symbols ..............................................4
 Assembly ............................................ 4
 Operation .........................................5-6
 Maintenance ....................................... 7
 Figures (Illustrations) .......................8-9
 Parts Ordering
and Service .........................Back page
TABLE DES MATIÈRES
 Avertissements de sécurité générales
relatives aux outils électriques ........2-3
 Avertissements de sécurité relatifs
perceuse-tournevis ............................3
Symboles ............................................4
 Assemblage ........................................4
 Utilisation ........................................5-6
 Entretien .............................................7
 Figures (illustrations) ........................8-9
 Commande de pièces
et dépannage ....................Page arrière
ÍNDICE DE CONTENIDO
 Advertencias de seguridad generales
para la herramienta eléctrica ......... 2-3
 Advertencias de seguridad taladro-
destornillador .....................................3
Símbolos ............................................4
 Armado ..............................................4
 Funcionamiento ............................. 5-6
 Mantenimiento ...................................7
 Figuras (illustraciones) ................... 8-9
 Pedidos de piezas
y servicio .......................Pág. posterior
SAVE THIS MANUAL FOR
FUTURE REFERENCE
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS

Ryobi HJP003 Specifications

General

Brand	Ryobi
Model	HJP003
Category	Drill
Language	English

Summary

General Power Tool Safety Warnings

Work Area Safety

Keep work area clean, well lit, and free of flammables and distractions.

Electrical Safety

Ensure proper grounding, avoid wet conditions, and protect cords from damage.

Personal Safety

Stay alert, wear protective equipment, and prevent unintentional tool startup.

Power Tool Use and Care

Use correct tool, do not force, disconnect power before adjustments, and maintain tool.

Battery Tool Use and Care

Drill-Driver Safety Warnings

Symbols

Signal Words and Meanings

Defines hazard levels indicated by DANGER, WARNING, CAUTION, and NOTICE.

Product Symbols and Explanations

Explains common symbols like Safety Alert, Read Manual, Eye Protection, and Recycle.

Assembly

Operation

Variable Speed Switch Trigger

Controls drill speed via trigger pressure for ON/OFF and variable speed operation.

Direction of Rotation Selector

Selects forward, reverse rotation, or locks the switch trigger for safety.

Installing/Removing Battery Pack

Instructions for securely inserting and removing the battery pack.

Installing/Removing Bits

Procedures for inserting and removing drill bits using the keyless chuck.

Adjusting Torque

Setting the torque adjustment ring for screws and drilling tasks.

Drilling/Driving Screws

Guidance on drilling into materials and driving screws with proper technique.

Wood and Metal Drilling

Best practices for drilling in wood and metal, including bit selection and cooling.