Ryobi HP472 - Features and Specifications; Product Specifications Overview; Drill and Charger Component Diagram

8 9
FEATURES
PRODUCT SPECIFICATIONS
Chuck ............................................................................................................................................................... 3/8 in. Keyless
Motor......................................................................................................................................................................7.2 Volt DC
Switch.....................................................................................................................................................................Two Speed
No Load Speed ...................................................................................................................................................330/520/min.
Clutch ................................................................................................................................................................... 24 Positions
Charger Input ........................................................................................................................................ 120 V, 60 Hz, AC only
Charge Rate .............................................................................................................................................................3-6 Hours
Torque......................................................................................................................................................... Maximum 55 in.lb.
Fig. 1
CHARGER
BATTERY
PACK
SWITCH
TRIGGER
BIT STORAGE
KEYLESS
CHUCK
LEVEL
TORQUE
ADJUSTMENT RING
DIRECTION OF
ROTATION SELECTOR
(FORWARD / REVERSE
AND CENTER LOCK)