To Next PageTo Next Page
Need help?Do you have a question about the Ryobi JS651L and is the answer not in the manual?
General| Brand | Ryobi |
|---|---|
| Model | JS651L |
| Category | Power Tool |
| Language | English |
Covers tool exchange within 90 days for defective workmanship or materials.
Covers defects for three years; accessories for 90 days.
Return tool to Authorized Service Center with proof of purchase.
Excludes misuse, abuse, neglect, alteration, or unauthorized repairs.
Limits implied warranties and excludes incidental damages.
Explains safety feature eliminating grounding requirement.
Guidelines for selecting and using extension cords.
Specifies 120V AC, 60Hz power and warns against DC use.
Lists input, speed, stroke length, settings, and weight.
Adjusts base from 0-45° left/right for bevel cuts.
Protects operator from accidental contact with the saw blade.
Ensures accurate cutting by supporting the blade.
Directs debris away from the cut line for visibility.
Aids in making straight cuts using the workpiece edge.
Illuminates the work area for clear view of cut line.
Enables continuous operation without holding the switch.
Protects delicate surfaces from base scratches.
Selects four orbital settings for varied material cutting.
Allows quick blade installation/removal without a wrench.
Connects to a standard hose for dust collection.
Allows operator control of speed and power limits.
Warns about chemicals causing cancer or birth defects.
Instructions for removing product and checking packing list.
Lists included items like jig saw, blades, and accessories.
Lists intended uses: cutting wood, metal, and plastics.
Step-by-step guide for T-shank blades.
How to use the switch trigger to control operation.
Details engaging/disengaging lock-on feature for continuous use.
Instructions for attaching vacuum hose to port.
How to adjust speed/power for different applications.
Instructions for making cuts, blade alignment, and pressure.
Explains adjustable orbital feature for faster cutting.
How to make straight cuts using guides.
Adjusting base for bevel cuts using hex key.
Making curved cuts by guiding the saw.
Procedures for plunge cuts with/without pilot holes.
Guidelines for cutting metals, including orbital mode and lubricant.
Cleaning plastic parts, avoiding solvents.
Bearings pre-lubricated for life, no further lubrication needed.
Service by authorized center recommended for safety.
Purchase parts online or by phone.
Find centers via website or phone.
Contact info for inquiries.
