WARNING! The declared vibration total
values and the declared noise emission values
given in this instruction manual have been
measured in accordance with a standardised
test and may be used to compare one tool with
another. They may be used for a preliminary
assessment of exposure.
The declared vibration and noise emission
values represent the main applications of the
tool. However, if the tool is used for dierent
applications, used with dierent accessories,
or poorly maintained, the vibration and noise
emission may dier. These conditions may
signicantly increase the exposure levels over
the total working period.
An estimation of the level of exposure to
vibration and noise should take into account
the times when the tool is turned o or when
it is running idle. These conditions may
signicantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect
the operator from the eects of vibration and
noise, such as maintaining the tool and the
accessories, keeping the hands warm (in case
of vibration), and organising work patterns.
To Next Page
Loading...
