Do you have a question about the Ryobi ONE+ P2109 and is the answer not in the manual?
Align and push blower tubes onto the housing and each other until seated.
Align battery pack in port, ensuring latches snap into place for secure operation.
Place the ON/OFF switch in the ON (I) or OFF (0) position to start or stop the blower.
Blow around debris edges, limit equipment use, and use rakes/brooms to loosen debris.
Use clean cloths for cleaning plastic parts; avoid solvents and chemicals.
Clean blower and store indoors in a secure place away from children and corrosive agents.
Align and push blower tubes onto the housing and each other until seated.
Align battery pack in port, ensuring latches snap into place for secure operation.
Place the ON/OFF switch in the ON (I) or OFF (0) position to start or stop the blower.
Blow around debris edges, limit equipment use, and use rakes/brooms to loosen debris.
Use clean cloths for cleaning plastic parts; avoid solvents and chemicals.
Clean blower and store indoors in a secure place away from children and corrosive agents.












Loading...