Ryobi OBL1820S - Getting Started; Assembly and Initial Operation

7
Getting Started
1
2
1
4
2 3
4
Wear full eye and ear protection,
substantial footwear, and long trousers
at all times while operating the product.
Do not operate the product when
barefoot or wearing open sandals.
Insert the high-speed nozzle into the
blower tube until it clicks into place.
Install the battery pack. Make sure that
the latches on the battery pack snap in
place. Slide up the switch to turn on the
product.
Hold the blower with the handle in your
right hand, and let the air stream work
close to the ground.
Insert the blower tube into the product
until it clicks into place.