To Next Page
T
Tiffany Wolfe MDJul 30, 2025
Why won't the line advance on my Ryobi Brush Cutter?
- DDr. Victoria ParkerJul 30, 2025
If the line won't advance on your Ryobi Brush Cutter's auto-feed head, several factors could be at play. The line might be welded to itself; try lubricating it with silicone spray. Alternatively, there might not be enough line on the spool, so install more line. If the line is tangled, pull it while pressing the black button on the cutting head. Also, ensure the battery is both charged and securely latched. Cutting tall grass from the top down can prevent wrapping.
General
