EasyManua.ls Logo

Ryobi P131 - Charger Features and Specifications; Product Specifications; Charger Operation Indicators; Thermal Protection and Connector

Ryobi P131
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
FEATURES
PRODUCT SPECIFICATIONS
Charger Voltage ..............................................................................................................................................7.2 V - 18 V DC
Charger Input.................................................................................................................................................... 12 V, DC only
Charge Rate ..................................................................................................................................................................1 hour
Cord Length ......................................................................................................................................................................3 ft.
KNOW YOUR CHARGER
See Figure 1.

with all operating features and safety rules.
THERMAL PROTECTION
Your single-port charger has a thermal protection system
that prevents charging batteries that are too hot, which could
cause damage to the battery and a loss of run-time.
Fig.1
P130 universal
car cHarGer
POWer “On”
(reD leD)
ciGarette liGHter
cOnnectOr
cOrD
sinGle POrt battery
recePtacle
DeePly
DiscHarGeD
Or DeFective
battery
(yellOW leD On
- reD FlasHinG)
Quick cHarGinG
(reD leD On) / evaluatinG
(reD FlasHinG leD)
Fully cHarGeD
(Green leD On) /
cHarGinG
(Green FlasHinG
leD)
LED DISPLAY
The LED lights located next to each battery port indicate the
charge status of each battery.
CIGARETTE LIGHTER CONNECTOR

receptacle or “power point.”

Other manuals for Ryobi P131