EasyManua.ls Logo

Ryobi P2501BTL - User Manual

Ryobi P2501BTL
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
18 VOLT POLE SAW
SCIE DE MANCHE 18 V
SIERRA DE PÉRTIGA DE 18 V
P2501
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
TABLE OF CONTENTS
Important Safety Instructions .......... 2-3
Specific Safety Rules ...................... 3-5
Symbols .......................................... 5-6
Features .......................................... 7-8
Assembly ...................................... 8-10
Operation .................................... 10-13
Maintenance ............................... 14-19
Troubleshooting ................................19
Parts Ordering/Service ........ Back Page
AVERTISSEMENT : Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation
avant d’employer ce produit.
TABLE DES MATIÈRES
Instructions importantes
concernant la sécurité..................... 2-3
Règles de sécurité particulières ...... 3-5
Symboles ........................................ 5-6
Caractéristiques .............................. 7-8
Assemblage .................................. 8-10
Utilisation .................................... 10-13
Entretien ...................................... 14-19
Dépannage ........................................ 19
Commande de pièces/
réparation .......................... Páge arrière
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe
leer y comprender el manual del
operador antes de usar este producto.
ÍNDICE DE CONTENIDO
Instrucciones de seguridad
importantes ..................................... 2-3
Reglas de seguridad específicas .... 3-5
Símbolos ......................................... 5-6
Características ................................ 7-8
Armado ......................................... 8-10
Funcionamiento .......................... 10-13
Mantenimiento ............................ 14-19
Solución de problemas .....................19
Pedidos de piezas/
servicio ........................... Pág. posterior
SAVE THIS MANUAL FOR
FUTURE REFERENCE
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS

Questions and Answers

  • D
    Donald RubioAug 12, 2025
    What to do if my Ryobi P2501BTL Pole Saw motor runs, but the chain is not rotating?
    • M
      Michael ThompsonAug 12, 2025
      If the motor of your Ryobi Pole Saw runs but the chain isn't rotating, it could be due to a chain tension that's too tight, or damage to the guide bar and chain assembly. Try re-tensioning the chain. Inspect the guide bar and chain for any signs of damage.
  • D
    Dr. Christina MurphyAug 19, 2025
    Why is my Ryobi P2501BTL chain not rotating?
    • B
      Brian SmithAug 19, 2025
      If the motor runs but the chain isn't rotating, it could be due to the chain tension being too tight, or damage to the guide bar and chain assembly. Try re-tensioning the chain and inspect the guide bar and chain for any damage.
  • B
    Bryan VillaAug 27, 2025
    Why is the bar and chain on my Ryobi Pole Saw running hot and smoking?
    • V
      Vanessa CalderonAug 27, 2025
      If the bar and chain of your Ryobi Pole Saw are running hot and smoking, it might be because the chain tension is too tight. You should check the chain tension and adjust it accordingly.
  • J
    jeanette02Sep 3, 2025
    Why is my Ryobi Pole Saw bar and chain running hot and smoking?
    • A
      Amanda JamesSep 3, 2025
      If the bar and chain are running hot and smoking, this could be caused by the chain tension being too tight. Re-tension the chain.

Ryobi P2501BTL Specifications

General IconGeneral
TypePole Saw
Power SourceBattery
Voltage18V
Battery Voltage18V
Bar Length8 in
Maximum Reach12 ft
Weight8.8 lbs
Max Cutting Diameter6 in.

Related product manuals