To Next PageTo Next PageWhat to do if my Ryobi P435 Sander polisher does not turn on?
If your Ryobi Sander polisher doesn't turn on, it could be due to a discharged battery. In this case, you should charge the battery. Alternatively, there might be a problem with the motor, which requires you to call an authorized service center.
Why is the pad on my Ryobi Sander spinning slower than normal?
If the pad on your Ryobi Sander spins slower than normal or not at all, it indicates that the motor needs servicing or replacement. Contact an authorized service center to address this issue.
Why is polishing with my Ryobi P435 so difficult?
If you're finding polishing difficult with your Ryobi Sander, the bonnet may be worn. Try replacing the bonnet to see if that improves the polishing process.
How to fix uneven wax application with Ryobi P435?
If the wax isn't going on evenly when using your Ryobi Sander, it might be due to applying too much wax on the bonnet. Remove some of the wax and try again.
General| Type | Random Orbit Sander |
|---|---|
| Power Source | Cordless |
| Voltage | 18V |
| Dust Collection | Yes |
| Sanding Pad Size | 5 inches |
| Variable Speed | Yes |
| Weight | 3.5 lbs |
| Speed | 8, 000 - 12, 000 OPM |
| Orbit Diameter | 3/32 inches |
Keep work area clean, well-lit, and free from flammable materials.
Proper grounding, avoiding wet conditions, and using correct cords.
Stay alert, use PPE, prevent unintentional starting, and dress properly.
Use correct tool, check switch function, disconnect power, and store properly.
Use correct charger and battery packs, and handle batteries safely.
Be aware of hazards when not using battery tools or changing accessories.
Avoid fire, heat, damage, and handle leaks carefully.
Avoid charging in wet locations and use correct temperature range.
