Ryobi P518 - User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
18 VOLT BRUSHLESS RECIPROCATING SAW
SCIE ALTERNATIVE 18 V À MOTEUR SANS BALAI
SIERRA ALTERNATIVA DE 18 V SIN ESCOBILLAS
P518
TABLE OF CONTENTS
****************
 General Power Tool Safety
Warnings .........................................2-3

Reciprocating Saw Safety Warnings .. 3
Symbols
..............................................4
Features
..............................................5

Assembly ............................................ 5

Operation .........................................5-7

Maintenance ....................................... 7

Illustrations ......................................8-9

Parts Ordering and
Service ................................Back page
TABLE DES MATIÈRES
****************
 Avertissements de sécurité générales
relatives aux outils électriques ........2-3

Avertissements de sécurité
relatifs scie alternative .......................3
Symboles
............................................4
Caractéristiques
.................................5

Assemblage ........................................5

Utilisation ........................................5-7

Entretien .............................................7

Illustrations ......................................8-9

Commande de pièces et
dépannage ........................Page arrière
ÍNDICE DE CONTENIDO
****************
 Advertencias de seguridad
para herramientas eléctrica ........... 2-3

Advertencias de seguridad
para sierra alternativa ........................3
 Símbolos
............................................4
Características
...................................5

Armado ..............................................5

Funcionamiento ............................. 5-7

Mantenimiento ...................................7

Illustraciones .................................. 8-9

Pedidos de piezas y
servicio .........................Pág. posterior
SAVE THIS MANUAL
FOR FUTURE REFERENCE
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
WARNING:
To reduce the risk of injury, the user
must read and understand the opera-
tor’s manual before using this product.
AVERTISSEMENT :
Pour réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien com-
prendre le manuel d’utilisation avant
d’utiliser ce produit.
ADVERTENCIA:
Para reducir el riesgo de lesiones, el
usuario debe leer y comprender el
manual del operador antes de usar
este producto.

Summary

General Power Tool Safety Warnings

Work Area Safety

Electrical Safety

Guidelines for safe use of power tools concerning electrical connections and grounding.

Personal Safety

Precautions for the operator's safety, including staying alert and using protective equipment.

Power Tool Use and Care

Reciprocating Saw Safety Warnings

Battery Tool Use and Care

Safe handling, charging, and storage of battery packs and tools to prevent hazards.

Safe Handling Practices

Proper techniques for holding, securing workpieces, and understanding tool operation.

Personal Protective Equipment (PPE)

Always wear eye, lung, and hearing protection during operation.

Battery Safety Precautions

Guidelines for safe use, storage, charging, and handling of battery packs and tools.

Product Features

Assembly Warnings

Safety advice regarding proper assembly and avoiding modifications.

Operation Safety

Key safety precautions during tool operation, including awareness and battery management.

Selecting Blades

Operation

Installing;Removing Battery Pack

Installing;Removing Blade

Turning the Saw On;Off

General Cutting

Plunge Cutting

Continued Operation

Plunge Cutting Technique

Electrical Wiring Safety

Precautions when cutting near electrical wiring to avoid shock.

Metal Cutting

Maintenance

Maintenance Warnings

Safety instructions for servicing, including using correct parts and personal protection.

General Maintenance

Service and Support Information

Requesting Service or Parts

Warranty Information

Ryobi P518 Specifications

General

Power Source	Battery
Voltage	18V
Max Bevel Cut	45°
Motor	Brushless
Battery Included	No
Max Cutting Depth at 90°	1-5/8 inches
Max Cutting Depth at 45°	1-1/8 in.
Bevel Capacity	0° - 45°
Battery Compatibility	Ryobi ONE+ 18V