Ryobi P545 User Manual

Cette scie à chaîne a été conçue et fabriquée conformément
aux strictes normes de fiabilité, simplicité d’emploi et sécurité
d’utilisation. Correctement entretenue, elle vous donnera des années
de fonctionnement robuste et sans problème.
AVERTISSEMENT : Pour réduire les risques de
blessures, l’utilisateur doit lire et veiller à bien comprendre le
manuel d’utilisation avant d’employer ce produit.
Merci de votre achat.
Su motosierra inalámbrica ha sido diseñada y fabrica-
da de conformidad con nuestras estrictas normas para
brindar fiabilidad, facilidad de uso y seguridad para el opera-
dor. Con el debido cuidado, le brindará muchos años de sólido
y eficiente funcionamiento.
ADVERTENCIA: Para reducir el riesgo de lesiones,
el usuario debe leer y comprender el manual del operador antes
de usar este producto.
Le agradecemos su compra.
CONSERVER CE MANUEL POUR
FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL PARA
FUTURAS CONSULTAS
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your chain saw has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for your purchase.
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
18 VOLT CHAIN SAW
SCIE À CHAÎNE 18 V
MOTOSIERRA DE 18 V
P545
ACCEPTS ALL ONE+ BATTERY PACKS
BATTERIES AND CHARGERS SOLD SEPARATELY
COMPATIBLE AVEC TOUS LE BATTERIES ONE+
PILES ET CHARGEUR VENDUS SÉPARÉMENT
ACEPTA TODOS LOS PAQUETES DE BATERÍAS ONE+
LAS BATERÍAS Y EL CARGADOR SE VENDEN POR SEPARADO

Ryobi P545 Specifications

General

Type	Cordless Chainsaw
Power Source	Battery
Voltage	18V
Bar Length	14 inches
Battery Compatibility	Ryobi 18V ONE+ Batteries
Chain Pitch	3/8 in.
Chain Gauge	0.050 inches

Summary

General Safety Rules

Basic Safety Precautions

Key safety measures for operating the chain saw.

Safety Apparel

Recommended protective clothing and gear for safe operation.

General Safety Rules: Kickback Prevention

Kickback Hazards and Prevention

Explanation of kickback and precautions to minimize it.

General Safety Rules: Work Area and Devices

Work Area Safety and Safety Devices

Guidelines for work area safety and understanding safety devices.

Specific Safety Rules: Battery Handling

Battery Safety Guidelines

Safety precautions related to battery packs and charging.

Understanding Safety Symbols

Signal Words and Product Symbols

Meanings of signal words and symbols used on the product.

Understanding Safety Symbols: Additional Icons

Additional Product Symbols

Meanings of additional product symbols and their explanations.

Product Features and Specifications

Specifications and Chainsaw Overview

Technical details of the saw and an introduction to its parts.

Assembly and Unpacking Procedures

Unpacking and Assembly Warnings

Instructions for unpacking and safety precautions during assembly.

Operation: Applications, Battery, and Oil

Applications, Battery Installation, and Oil System

Intended uses, battery handling, and chain oil system setup.

Operating the Chainsaw: Start, Stop, and Grip

Starting, Stopping, and Grip Techniques

Procedures for starting, stopping, and proper grip for safe operation.

Operating the Chainsaw: Grip and Body Position

Proper Grip and Body Positioning

Detailed guidance on hand grip and body positioning during operation.

Cutting Techniques and Safety: Stance, Procedure, Work Area

Cutting Stance, Basic Procedure, and Work Area Rules

Proper stance, basic cutting steps, and work area safety rules.

Cutting Techniques and Safety: Tree Felling Warnings

Tree Felling Safety Precautions

Safety precautions and considerations for felling trees.

Cutting Techniques and Safety: Tree Felling Procedures

Tree Felling Procedures and Hazards

Additional safety warnings and procedures for felling trees.

Cutting Techniques and Safety: Felling Backcut and Bucking

Felling Backcut and Bucking Safety

Instructions for felling backcuts and general bucking safety.

Cutting Techniques and Safety: Bucking Logs and Cut Types

Bucking Under Stress and Cutting Types

Techniques for bucking logs under stress and types of cuts.

Cutting Techniques and Safety: Limbing, Pruning, Springpoles

Limbing, Pruning, and Springpole Hazards

Procedures for limbing, pruning, and handling springpole hazards.

Maintenance: General and Battery Recycling

General Maintenance and Battery Recycling

Routine maintenance, cleaning, and battery pack disposal.

Maintenance: Bar and Chain Replacement

Replacing Bar and Chain

Detailed instructions for replacing the guide bar and chain.

Maintenance: Recommended Bar and Chain Combinations

Recommended Bar and Chain Combinations

Specifications for compatible bar and chain parts.

Maintenance: Chain Tension Adjustment

Chain Tension Adjustment Procedure

Procedures for adjusting and checking chain tension.

Chain Maintenance and Sharpening

Chain Maintenance and Cutter Sharpening

Guidelines for maintaining chain condition and sharpening cutters.

Chain Maintenance: Cutter Filing and Depth Gauge

Cutter Filing Angles and Depth Gauge Clearance

Correct filing angles for top/side plates and depth gauge clearance.

Maintenance: Guide Bar and Storage

Guide Bar Maintenance and Saw Storage

Procedures for maintaining guide bars and safely storing the saw.

Troubleshooting Common Issues

Common Issues and Solutions

Troubleshooting steps for common problems like overheating and non-rotating chain.

Warranty Information

Limited Warranty Statement

Details of the product's limited warranty statement and coverage.