To Next PageTo Next Page
Need help?Do you have a question about the Ryobi PBLID02 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Max Torque | 1, 800 in-lbs |
| Chuck Size | 1/4 in |
| LED Light | Yes |
| Brushless Motor | Yes |
| Battery Type | Lithium-ion |
| Impact Rate | 3, 600 BPM |
Safe practices for the work environment, including cleanliness and avoiding hazardous atmospheres.
Guidelines for preventing electric shock, including proper plug use and avoiding wet conditions.
Measures to ensure operator safety, such as staying alert and wearing protective equipment.
Instructions on how to properly use and maintain the power tool to prevent accidents.
Lists the intended uses for the tool, such as driving screws, nuts, and bolts.
Explains how the tool automatically shuts off when overloaded and how to reset it.
Describes the tool's overheat protection and how to resume operation after it triggers.
Instructions for attaching or detaching the belt hook or bit holder accessory.
Details on how to set the forward, reverse, and center lock modes for the tool.
Explanation of how the variable speed trigger controls the tool's speed.
Steps for correctly inserting and removing the battery pack from the tool.
Instructions for inserting and removing bits into the tool's collet.
Information about the LED light function and when it illuminates.
Guide to cycling through and using the different speed and assist modes.
Guidelines for cleaning the tool, avoiding solvents, and proper care.
Table detailing LED light status, scenarios, and required actions.
