Ryobi R161 User Manual

OPERATOR'S MANUAL
R161 ROUTER
DOUBLE INSULATED
SPECIFICATIONS:
Depth Of Cut 0 - 1-1/2 in. (0 - 38.1 mm)
Collet 1/4 in. (6.4 mm)
Horsepower 1-1/2 HP
Rating 120 Volts, 60Hz, AC Only
Amperes 8.0
No Load Speed 25,000 RPM
Net Weight 7.8 lbs. (3.5 kg)
SAVE THIS MANUAL FOR FUTURE REFERENCE
THANK YOU FOR BUYING A RYOBI ROUTER.
Your new router has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and
operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
CAUTION: Carefully read through this entire operator's manual before using your new router.
Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your router properly and only for what
it is intended, you will enjoy years of safe, reliable service.
Thank you again for buying a Ryobi router.

Ryobi R161 Specifications

General

Brand	Ryobi
Model	R161
Category	Network Router
Language	English

Summary

Rules for Safe Operation

Safety Symbol Definitions

Explains safety symbols like DANGER, WARNING, CAUTION, and NOTE for user awareness.

Double Insulation Safety

Details the double insulation system for user protection against electrical shock.

Personal Protective Equipment

Mandates wearing safety glasses, dust masks, and hearing protection.

General Safe Operating Practices

Covers essential practices like keeping area clean, using proper cords, preventing accidental starts.

Environmental and Usage Precautions

Warns against hazardous environments, low voltage, and handling dust.

Electrical and Unpacking

Extension Cord Guidelines

Provides a chart for selecting appropriate wire gauge based on cord length and amperage.

Electrical Connection Requirements

Details voltage, frequency, and current type requirements for power connection.

Unpacking and Inspection

Guides on unpacking, inspecting for damage, and checking included items.

Features

Chip Shield Functionality

Explains the purpose and removal/installation of the chip shield.

Lock-On Button Operation

Details how to use the lock-on feature for continuous operation.

Adjustments

Installing and Removing Cutters

Step-by-step instructions for safely installing and removing router bits.

Spindle Lock Mechanism

Describes how to engage and disengage the spindle lock for cutter changes.

Depth of Cut Adjustments

Explains how to set the router's cutting depth for various applications.

Depth of Cut for Router Table Use

Details how to adjust depth of cut when the router is mounted upside down.

Operation

Feeding Techniques

Guides on correct feed rates, avoiding force feeding and slow feeding issues.

Depth of Cut and Direction

Explains depth adjustments, feed direction, and thrust for accuracy and safety.

Routing Methods

Details various routing methods like edge shaping, freehand, internal cuts, and using guides.

Router Table Operation

Details how to mount and use the router safely on a router table.

Maintenance

General Maintenance Advice

Provides tips on cleaning plastic parts and avoiding damaging solvents.

Cutter Care and Sharpening

Guides on keeping cutters clean, sharp, and properly maintained for performance.

Collet Care and Cleaning

Explains how to clean the collet and collet nut and proper tightening procedures.

Lubrication Information

States that the tool's bearings are pre-lubricated for its lifetime.

Helpful Hints for Routing

Offers practical tips for safe and effective router operation.

Service and Accessories

Optional Accessories

Lists recommended accessories for the router, including part numbers.

Extension Cord Caution

Warns about the importance of using correct extension cords for safety.

Model and Serial Number Recording

Instructs users to record their tool's model and serial numbers for service.