EasyManua.ls Logo

Ryobi RLM12E33H - Residual Risks; Risk Reduction; Know Your Product; Symbols on the Product

Ryobi RLM12E33H
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Check the grass discharge chute for
blockages and carefully clear.
Turn the product on its side, check its
underside, and the area around the
blade. If any blockages are found, remove
carefully. Remember the blade may move
during cleaning.
RESIDUAL RISKS
Even when the product is used as prescribed,
it is still impossible to completely eliminate
certain residual risk factors. The following
hazards may arise in use and the operator
should pay special attention to avoid the
following:
injury caused by vibration
Always use the right tool for the job. Use
designated handles and restrict working
time and exposure.
injury caused by noise
Exposure to noise can cause hearing
injury. Wear ear protection and limit
exposure.
injury from contact with the blades
injury caused by thrown objects
RISK REDUCTION
It has been reported that vibrations from hand-
held tools may
contribute to a condition called
Raynaud’s Syndrome in certain individuals.
Symptoms may include tingling, numbness
and blanching of the ngers, usually apparent
upon exposure to cold. Hereditary factors,
exposure to cold and dampness, diet,
smoking and work practices are all thought
to contribute to the development of these
symptoms. There are measures that can be
taken by the operator to possibly reduce the
effects of vibration:
Keep your body warm in cold weather.
When operating the unit wear gloves
to keep the hands and wrists warm. It is
reported that cold weather is a major factor
contributing to Raynaud’s Syndrome.
After each period of operation, exercise to
increase blood circulation.
Take frequent work breaks. Limit the
amount of exposure per day.
If you experience any of the symptoms of this
condition, immediately discontinue use and
see your physician.
WARNING
Injuries may be caused, or aggravated, by
prolonged use of a tool. When using any
tool for prolonged periods, ensure you take
regular breaks.
KNOW YOUR PRODUCT
See page 8.
Parts
1. On/off button
2. Handle
3. Motor control cable
4. Motor control cable retainer
5. Height adjustment lever
6. Power cord retainer
7. Power cord
8. Grass catcher full indicator
9. Grass catcher
10. Rear wheel
11. Front wheel
12. Start button
SYMBOLS ON THE PRODUCT
Read and understand all
instructions before operating
the product, follow all warnings
and safety instructions.
Wear ear protection.
Wear eye protection.
Do not operate on inclines
greater than 15°. Mow across
the face of slopes, never up
and down.
Do not expose to rain or damp
condition.
Beware of sharp blades.
Blades continue to rotate
after the motor is switched
off – Remove plug from mains
before maintenance or if cord is
damaged.
5

Related product manuals