EasyManua.ls Logo

Ryobi RLM4614SE - Maintenance Schedule

Ryobi RLM4614SE
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
11
MAINTENANCE SCHEDULE
Before
each use
After 1st month
or 20 hours of
operation
Every 3 months
or 50 hours of
operation
Every 6 months
or 100 hours
of operation
Every 12 months
or after 300
hours
of operation
Check engine oil
n
Change engine oil
n n
Check air lter
n
Clean air lter
n
Change air lter
n
Replace the fuel lter
n
Check/adjust spark plug
n
Replace spark plug
n
Check/adjust idle speed
n
Check/adjust valve
clearance*
n
Clean fuel tank and lter*
n
Check fuel tube
n
* These items should only be carried out by an authorised service center.
NOTE: Maintenance should be performed more frequently when the product is used in dusty areas.
When the engine has exceeded the maximum figures specified in the table, maintenance should still be cycled
according to the intervals of time or hours stated herein.
20141022v2

Related product manuals