Ryobi RP4050 User Manual

Your stud sensor has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
CAUTION: To reduce the risk of injury or property damage, the user must read and understand the operator’s manual
before using this product. If you do not understand the warnings and instructions in the operator’s manual, do not use
this product.
Su detector de pernos ha sido diseñado y fabricado de conformidad
con nuestras estrictas normas para brindar fiabilidad, facilidad de
uso y seguridad para el operador. Con el debido cuidado, le brindará
muchos años de sólido y eficiente funcionamiento.
PRECAUCIÓN: Para reducir el riesgo de lesiones o daños
a los bienes, el usuario debe leer y comprender el manual del
operador antes de usar este producto. Si no comprende las
advertencias y las instrucciones incluidas en el manual del
operador, no use este producto.
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
TEK4® 4 VOLT
STUD SENSOR
DÉTECTEUR DE MONTANTS
DE 4 V TEK4®
DETECTOR DE PERNOS
DE 4 V TEK4®
RP4050
Votre détecteur de montants a été conçue et fabriquée conformément
à nos strictes normes de fiabilité, simplicité d’emploi et sécurité
d’utilisation. Correctement entretenue, elle vous donnera des années
de fonctionnement robuste et sans problème.
ATTENTION : Pour réduire les risques de blessures et
de dommages matériels, l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant d’utiliser ce produit. Si
tous les avertissements et toutes les consignes de sécurités et
instructions du manuel d’utilisation ne sont pas bien compris,
ne pas utiliser ce produit.
CONSERVER CE MANUEL POUR
FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL PARA
FUTURAS CONSULTAS
SAVE THIS MANUAL FOR FUTURE REFERENCE
1/2”
STUD SENSOR
12mm
25mm
1”
AC
READY
38mm
1
1/2”
STUD
IMPACT/DUST/WATER

Ryobi RP4050 Specifications

General

Brand	Ryobi
Model	RP4050
Category	Multimeter
Language	English

Summary

Warranty

Limited Two Year Warranty and 90 Day Exchange Policy

Details the warranty terms and exchange policy for the product.

Important Safety Instructions

Product Use and Care

Guidelines for proper usage and maintenance of the product.

Battery Product Use and Care

Specific instructions for handling and caring for the battery.

Service

Information regarding product servicing and replacement parts.

Symbols

Features

Product Specifications

Technical details and specifications of the stud sensor.

Assembly

Instructions for unpacking and checking the product components.

Operation

Applications

Lists the intended uses for the stud sensor.

Install/Remove Battery Pack

Step-by-step guide for battery installation and removal.

Operating Tips

Advice and best practices for using the stud sensor.

Using the Stud Sensor

Detailed instructions on how to operate the stud sensor for detection.

Locating Live Wires

Instructions for detecting live AC wires within walls.

Maintenance

General Maintenance

Guidelines for cleaning and maintaining the product's exterior.

Device Storage

Recommendations for storing the product when not in use.

Battery Pack Preparation for Recycling

Instructions for safely handling and preparing battery packs for disposal.

California Proposition 65 Warning

Information regarding chemicals present in the product as per state law.

Replacement Parts

How to Obtain Replacement Parts

Information on purchasing replacement parts.

Customer or Technical Support

Contact details for customer and technical assistance.