To Next PageTo Next PageWhy is my Ryobi RY40805 Snow Blower not starting?
If your Ryobi Snow Blower isn't starting, it could be due to a low battery or the start button not being pressed. Ensure the battery is fully charged and that you firmly press the start button.
What to do if the impeller doesn't turn on my Ryobi RY40805 Snow Blower?
If the impeller of your Ryobi snow blower doesn't turn while the motor is running, the drive belt may be worn or broken. It is recommended to have the drive belt replaced by an authorized service center.
How to fix a Ryobi RY40805 chute that is hard to turn?
If the chute on your Ryobi snow blower is difficult to turn, the chute lever lower rod might not be fully seated. Remove the lower part of the chute lever from the blower housing. Manually position the chute so it faces forward, then reinstall the chute lever.
Why does my Ryobi RY40805 Snow Blower leave a layer of snow on the ground?
If your Ryobi snow blower leaves a layer of snow on the ground after passing, the impeller/scraper mechanism might be worn. Have the impeller/scraper mechanism replaced by an authorized service center.
What to do if the handle of my Ryobi Snow Blower is not in position?
If the handle of your Ryobi Snow Blower is not in position, it may be because the handle adjustment knobs and/or handle lock clips are not secured. Ensure that the handle adjust knobs are fully seated and the handle lock clips are fully closed.
General| Voltage | 40V |
|---|---|
| Weight | 50 lbs |
| Motor Type | Brushless |
| Starter Type | Push button |
| Auger Material | Steel |
| Clearing Width | 21 inches |
| Throw Distance | Up to 35 feet |
| Battery Compatibility | 40V Lithium-Ion |
| Chute Control | Manual |
Instructions for installing and removing the battery pack from the power source.
Guide to operating the power source, including connecting devices and LED indicators.
