Page 7
MOTOR
Motor Type ......................................................................................................................................................... 120 V AC
Operating RPM ......................................................................................................................................................... 7500
Amperes ................................................................................................................................................................ 6 amps
DRIVE SHAFT AND CUTTING HEAD
Drive Shaft ............................................................................................................................................. 1/4 in. Flex Shaft
Cutting Head ......................................................................................................................................Bump Line Release
Cutting Path Diameter .............................................................................................................................. 15 in. (381 mm)
Drive Shaft Housing ................................................................................................................................. Aluminum Tube
Cutting Line Diameter ............................................................................................................................... .080 in. (2 mm)
INSTRUCTIONS
Carefully remove the parts from the box.
Inspect the parts carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the prod-
uct.
If any parts are damaged or missing, please call
1-800-860-4050 for assistance.
PACKING LIST
Upper shaft (Power head) (1)
Attachment shaft (Cutting head) (1)
Front Handle (1)
Carriage bolt - 6 mm x 50.0 mm (1)
Flat washer - 6 mm (1)
Wing nut - 6 mm (1)
Grass deflector (1)
Wing nut - 1/4 in. (1)
Flat washer - 1/4 in. (1)
Lock washer - 1/4 in. (1)
Hex bolt - 1/4 in. x 2 in. (1)
Operator’s manual
SPECIFICATIONS
UNPACKING
WARNING:
If any parts are missing, replace them before
operaing the product. Failure to do so could result in
serious personal injury.
To Next Page
Loading...
