To Next PageTo Next Page
Need help?Do you have a question about the Ryobi RY43161 and is the answer not in the manual?
Overview of the product's features and design priorities, emphasizing safety and reliability.
Emphasizes reading and understanding all instructions before use to prevent injury.
Highlights critical DANGER and CAUTION statements for immediate attention.
Details requirements for polarized plugs and extension cords for electrical safety.
Guidance on extension cord selection, ratings, and GFCI protection.
Explains kickback and provides rules for safe use.
Warning to maintain safe distance from electrical lines.
Mandates two-handed grip and cautions for small materials and tensioned limbs.
Emphasizes keeping the product clean, sharp, and maintaining cords.
Instructions for checking, repairing or replacing damaged parts and service requirements.
Explains important symbols like Safety Alert, Eye Protection, and Electrical Hazard warnings.
Covers symbols for gloves, footwear, electrical measurements, and speed.
Explains the meaning of signal words indicating risk levels.
Explanation of double insulation for electrical safety.
Specifies voltage, AC, and frequency requirements for the product.
Provides a chart and guidelines for selecting appropriate extension cords.
Warnings about keeping extension cords clear and checking for damage.
Lists product specs and highlights features like cord retainer and telescoping pole.
Instructions for unpacking and checking items against the packing list.
Critical warnings regarding damaged parts, modifications, and connecting power before assembly.
Step-by-step instructions for assembling the pole sections.
Critical warning about the risk of serious injury or death if poles are not locked.
Highlights DANGER and WARNINGS regarding power lines, familiarity, and attachments.
Lists intended uses and instructions for adding bar and chain lubricant.
Steps for connecting the product to an extension cord using the cord retainer.
Instructions on how to start and stop the motor using the switch trigger and lock-out button.
Guidance on adjusting the pole length for optimal reach and balance.
Advice on grip, stance, and checking collars before cutting.
Step-by-step guide for making cuts to prevent bark damage.
Warning about consequences of improper cuts and how to handle binding.
Specific techniques and precautions for limbing and pruning branches.
Strong warning against using a ladder for cutting.
Clarifies that the tool is not for felling trees or bucking logs.
Reinforces safety measures regarding electrical lines and bystanders.
Emphasizes using correct parts, wearing protection, and disconnecting power.
Covers cleaning, chemical avoidance, and chain tension adjustment.
Notes on new chain behavior and checking cold tension.
Step-by-step guide for removing and installing the bar and chain.
Safety warning to disconnect power before maintenance.
Instructions for chain oiler and indicators for chain sharpening.
Explains the importance of depth gauge setting for cutting and kickback.
Detailed instructions on filing chain cutters to maintain sharpness.
Warnings about motor damage and kickback risk from improper sharpening.
Details on correct filing angles for top and side plates, and depth gauge adjustment.
Procedures for maintaining the guide bar and guidelines for storing the product.
Troubleshooting steps for a hot and smoking bar and chain.
Troubleshooting steps for a motor that runs but the chain doesn't move.
Details the terms and conditions of the product warranty.
Warning about chemicals in the product known to cause cancer or birth defects.
Information on obtaining replacement parts and locating service centers.
General
