26 — English
MAINTENANCE SCHEDULE
Inspect
Before
Each Use
Every
25
Hours
Every
50 Hours
or Yearly
Every
100
Hours
Before
Storage
Check Brake Operation X
Check Tire Pressure X
Check Safety Interlock System X
Check for Loose Fasteners X X
Clean Debris From Mower X X
Grease Transaxle Fittings X
Check/Replace Mower Blades X
NOTE: Maintenance should be performed more frequently when mower is used in dusty areas.
When mower has exceeded the maximum figures specified in the table, maintenance should still be cycled according to
the intervals of time or hours stated herein.
If you are unsure how to perform any of the maintenance items listed above, take the mower to an authorized service center for
assistance.
MAINTENANCE
PREPARING FOR USE AFTER STORAGE
The following steps should be taken before using the mower
after it has been stored:
Review maintenance chart.
Fully charge the batteries.
Check tire pressure and inflate as needed.
Briefly drive the mower and check all systems and com-
ponents to ensure they are functioning correctly.
Periodically inspect for frayed and deteriorated insulation
on wires.
Fig. 24
GREASE
FITTINGS
To Next Page
Loading...
