Rytan RY200 User Manual

INCORPORA TED
RYTAN, INC. RESERVES THE RIGHT TO MAKE CHANGES WITHOUT NOTICE. PRICES MAY VARY FROM YOUR DISTRIBUTOR.
READ AND UNDERSTAND THIS OPERATOR’S MANUAL AND BECOME
FAMILIAR WITH YOUR NEW MACHINE BEFORE YOU START CUTTING KEYS.
RY101 Wire Brush Kit
Included!
RY114 Key Gauge Protector
Included!
MA380 ADJUSTABLE STYLUS
.0005”Accurate
(1/2 thousanth!)
Included!
NEW 4-WAY JAWS
CLAMPS MORE KEYS
2-WAY
3-WAY
1-WAY
4-WAY
NEW CUTTER RY20030
and RY20028 STYLUS
CUT MORE KEYS
ADD $135.00
RY39 Auxillary Lamp Kit
ADDITIONAL COST
STRAIGHT
NOW YOU CAN CUT KEYS LIKE GM AND KWIKSET
TITAN FIRST CUT WITH ONE SIDE STRAIGHT,
LIKE THE FACTORY!
RY20005 Complete
Carriage Assembly
Included!
RYTAN, INC. - 1648 W. 134th St. - Gardena, CA. 90249 (310) 328-6553 - fax (310) 212-6002
Model RY200
OPERATOR’S MANUAL
Rytan Model RY200 Semi-Automatic Key Duplicating Machine with 4-Way Jaws
for Cylinder Keys and Automotive Keys
CLAMPS MORE KEYS
NEW CUTTER AND STYLUS CUTS GM AND KWIKSET TITAN KEYS
BUILT IN MICRO-ADJUST STYLUS
Rytan Products are Designed and Manufactured in the U.S.A.

Rytan RY200 Specifications

General

Brand	Rytan
Model	RY200
Category	Disc Duplicator
Language	English

Summary

Mounting the Machine

Cutting Standard Keys

Cutting Direction

Cutting Deep Cuts in Small Keys

Cutting Process

Detailed steps for cutting deep cuts with the machine.

Vise Jaws

Clamping Keys

Tip or Behind-Tip Key Gauging

Releasing the Carriage

Removing and Replacing the Cutter

Removing the Cutter

Steps to remove the cutter wheel using a left-hand nut.

Replacing the Cutter

Procedure for installing a new cutter wheel and nut.

Depth Adjustment

Key Gauge Adjustment

Carriage Over Travel Depth Adjustment

Troubleshooting

Frequent Adjustment Issues

Causes for frequent machine adjustments and solutions.

Cutter Stalls Out

Identifies six possible causes for the cutter wheel stopping.

Stylus Material Shaving

Whirring Sound

Machine Won't Start

Troubleshooting steps for when the machine fails to power on.

Cutter Longevity Issues

Reasons for premature cutter wheel dulling or failure.

Cutter Wobbles

Part Replacement Procedures

Stylus Replacement

Cutter Shaft Replacement

Carriage Spring Replacement

Carriage Shaft and Bearings