To Next PageTo Next Page
Need help?Do you have a question about the RYTEC Turbo-Seal TS6000 and is the answer not in the manual?
Seller's obligation limited to repair or replacement of defective parts.
Warranty service covers labor for the first year; thereafter, charges apply.
Claims must be made within 30 days of discovery and prior to warranty expiration.
Warranty is made to the original buyer and is not transferable.
Excludes damages from unauthorized modification, misuse, neglect, or accident.
Exclusive warranty, disclaims implied warranties of merchantability or fitness for purpose.
Seller is not liable for indirect, incidental, or consequential damages.
Product descriptions are for identification only and not express warranties.
Warranty void if product is modified or not maintained per manual.
Explains keywords like WARNING, CAUTION, IMPORTANT, NOTE used in the manual.
Locations for finding the door's serial number for reference.
Provides a schedule for daily and quarterly maintenance tasks.
Outlines daily checks for visual damage, door operation, reversing edge, and photo eyes.
Details quarterly checks for hardware, anchors, fabric, and seals.
Checks close and open limits for proper door travel and positioning.
Inspects drive chain tension, alignment, and securing clips.
Checks the motor brake's ability to stop door travel at limit switch locations.
Inspects bottom bar hardware, reversing edge, and vinyl seal.
Tests kill switches for operation when bottom bar separates.
Measures counterweight mounting height and clearance.
Inspects counterweight straps for tears, fraying, or abrasions.
Checks warning labels, activator function, and control panel operation.
Inspects electrical connections in the drive system and head assembly.
Details lubrication requirements for the main drive chain.
Overview of the Rytec System 4 control system and its functions.
Explains the function and operation of the safety photo eyes.
Describes the bottom bar's features: breakaway capability and reversing edge.
How the reversing edge detects objects and reverses the door.
Procedures for adjusting the reversing edge switch sensitivity and air bleed.
Procedures for adjusting the kill switch air bleed and sensitivity.
Procedures for aligning and adjusting photo eyes for proper operation.
Steps to adjust the motor brake for proper door stopping.
Procedure to adjust the drive chain tension and alignment.
Steps to adjust the counterweights for proper door balance.
Step-by-step guide to safely replace a counterweight strap.
How to identify parts and place an order with Rytec, including online store.
Information on how substitute parts are handled due to product enhancements.
Policy for returning parts, including RMA requirements and incident numbers.
Information on accessing online manuals, service bulletins, and videos.
Details on accessing and using the Rytec online parts store.
Policy for returning items purchased from the online webstore.
Steps for returning items purchased from the online webstore.
Exploded view and part numbers for the side column assembly.
Exploded view and part numbers for the counterweight assembly.
Exploded view and part numbers for the head assembly.
Exploded view and part numbers for motor and gearbox components.
Exploded view and part numbers for drum and door panel components.
Exploded view and part numbers for the bottom bar assembly.
Seller's obligation limited to repair or replacement of defective parts.
Warranty service covers labor for the first year; thereafter, charges apply.
Claims must be made within 30 days of discovery and prior to warranty expiration.
Warranty is made to the original buyer and is not transferable.
Excludes damages from unauthorized modification, misuse, neglect, or accident.
Exclusive warranty, disclaims implied warranties of merchantability or fitness for purpose.
Seller is not liable for indirect, incidental, or consequential damages.
Product descriptions are for identification only and not express warranties.
Warranty void if product is modified or not maintained per manual.
Explains keywords like WARNING, CAUTION, IMPORTANT, NOTE used in the manual.
Locations for finding the door's serial number for reference.
Provides a schedule for daily and quarterly maintenance tasks.
Outlines daily checks for visual damage, door operation, reversing edge, and photo eyes.
Details quarterly checks for hardware, anchors, fabric, and seals.
Checks close and open limits for proper door travel and positioning.
Inspects drive chain tension, alignment, and securing clips.
Checks the motor brake's ability to stop door travel at limit switch locations.
Inspects bottom bar hardware, reversing edge, and vinyl seal.
Tests kill switches for operation when bottom bar separates.
Measures counterweight mounting height and clearance.
Inspects counterweight straps for tears, fraying, or abrasions.
Checks warning labels, activator function, and control panel operation.
Inspects electrical connections in the drive system and head assembly.
Details lubrication requirements for the main drive chain.
Overview of the Rytec System 4 control system and its functions.
Explains the function and operation of the safety photo eyes.
Describes the bottom bar's features: breakaway capability and reversing edge.
How the reversing edge detects objects and reverses the door.
Procedures for adjusting the reversing edge switch sensitivity and air bleed.
Procedures for adjusting the kill switch air bleed and sensitivity.
Procedures for aligning and adjusting photo eyes for proper operation.
Steps to adjust the motor brake for proper door stopping.
Procedure to adjust the drive chain tension and alignment.
Steps to adjust the counterweights for proper door balance.
Step-by-step guide to safely replace a counterweight strap.
How to identify parts and place an order with Rytec, including online store.
Information on how substitute parts are handled due to product enhancements.
Policy for returning parts, including RMA requirements and incident numbers.
Information on accessing online manuals, service bulletins, and videos.
Details on accessing and using the Rytec online parts store.
Policy for returning items purchased from the online webstore.
Steps for returning items purchased from the online webstore.
Exploded view and part numbers for the side column assembly.
Exploded view and part numbers for the counterweight assembly.
Exploded view and part numbers for the head assembly.
Exploded view and part numbers for motor and gearbox components.
Exploded view and part numbers for drum and door panel components.
Exploded view and part numbers for the bottom bar assembly.
General| Brand | RYTEC |
|---|---|
| Model | Turbo-Seal TS6000 |
| Category | Industrial Electrical |
| Language | English |
