Getting Started
Power on
O Pressand holdfor 3s
The voice prompt of connection will be heard. (The default mode is
Bluetooth mode with no AUX cable and TF card access)
The light will be multicolor slowly changing once powered on.
Connect via Bluetooth
Bluetooth
Bluetooth
Allow New Connections
a R -BSOIO
1. Enable Bluetooth on your device and search for pairing.
2. Select RY-BSOIO on the Bluetooth list.
3. Once paired, you can see the connected status on your device
and light will change.
Disconnect, reconnect and memory clear: see Button control
To Next Page
Loading...