Catalogue
I ： Precautions for using - - - - - - - - - - - - - - 1
Ⅱ
： Preparation before use - - - - - - - - - - - - 1
Ⅲ
： Key Function description - - - - - - - - - -2
Ⅳ
： Symbol description - - - - - - - - - - - - - - 2
Ⅴ
： On and off - - - - - - - - - - - - - - - - - - - - - 3
Ⅵ
： Zero Function - - - - - - - - - - - - - - - - - -3
Ⅶ
： Function operation - - - - - - - - - - - - - -4
Ⅷ
： Parameter setting - - - - - - - - - - - - - - 8
Ⅸ
： Range setting and internal correction
operation - - - -- - - - - - - - - - - - - - - - - - - - - - 16
X
： Message remind - - - - - - -- - - - - - - - -18
Ⅺ
： Technician parameter - - - - - - - - - - - 19
Ⅻ
： Load cell interface pin definition - - -19
I 、 Precautions for using
Please read this instruction manual carefully before
you use this scale.
1. Rain or washing with water is strictly prohibited.
2. Electronic scales are strictly forbidden to be placed in hot or
humid places.
3. Do not allow cockroaches and small creatures to enter the
machine and cause damage.
4. Do not hit or press (do not exceed its maximum weight
capacity).
5. Remove the battery when it is not in use for a long time.
6. When it is found that it can not be used for a long time after
charging for more than 10 hours, it means that the battery
has aged. Please contact the factory for replacement.
Ⅱ 、 Preparation before use
1. Please use the electronic scale on a stable, flat table; do not
place it on a rocking or vibrating gantry. Use four adjustment
feet to keep the machine steady, and note that the bubble of the
level needs to be in the center of the circle.
2. Avoid using the electronic scale in places where the
temperature changes too much or the air flow is severe, such as
To Next Page
Loading...
Need help?
General