HowToDoc: DS/HE-series preset setup
DS/HE-series preset setup
In this documentation you will find information about
the DS20/DS50/HE50 preset setup:
1. Loading presets from internal DS20/DS50 memory
2. Loading presets from external storage and store
to internal DS20, DS50 or HE50 memory
1. Loading presets from internal DS20/DS50/HE50 memory
This DS/HE-series preset setup manual guides you through the process of setting up the
desired configuration of the DS20/DS50/HE50 amplifier depending to your application.
This manual assumes that the user is familiar with the basic software functionality.
For more information please refer to the DS20,DS50 or HE50 user manual.
1. Select the desired preset by pressing arrow.
2. Press “load” in the Unit section to activate preset.
To Next Page
General