25Safety
Installation of child restraint using
the standard safety belt
Child restraint that are approved for rear-
ward facing installation in the rear seat can
be positioned in any of the three rear places.
If the child restraint is positioned in the
center place, the child restraint support legs
should be used.
The tethers should be fixed to the beam
beneath the driver´s and passenger´s seat.
The fixing points are color marked.
Make sure that it is possible to fit it in accor-
dance with the manufacturer’s instructions.
When fitting child restraints in cars you
must always read the instructions sup-
plied by the child seat manufacturer.
IB1686
IB1688
IB1178
Child restraints installed in the rear seat Child restraints installed in the rear seat
Fixing points for child restraint tethers
To Next Page
Loading...
