"
Tuner
Features
and
Operation
(All
Non-Turbo
Models)
PowerNolume Control
Rotate the power/volume knob clockwise to
turn
on
the radio. Rotating the knob more will
increase the volume.
If
"Code" appears
on
the
display when you turn the radio
on,
you must
enter your four digit electronic lock-out code.
(See Saab/Clarion Audio Protection System,
p.2).
NOTE!
The
radio
will
not
play
if
an
optional
Compact
Disc
Player/Equalizer
or
the
Equalizer/Autochanger
Controller
is
removed
from
it's
basket.
After
reinstalling the unit, the
electronic
lock-
out
code
must
be entered.
Fader
(Front to
Rear)
Push
the power/volume knob
in
toward
the
radio
and hold
while
rotating
clockwise from the center click-stop position to
emphasize
front
speaker
sound. Rotating
counter-clockwise from the center click-stop
position
will emphasize rear speaker sound.
The
center
click-stop
position
provides
an
equally balanced sound between front
and
rear.
Tuner Features and Operation (All Non-Turbo Models)
21
Balance
(Left
to
Right)
Pull
the powerlvolume knob out
to
the
locked
position.
Rotate
the
knob
clockwise from the center click-stop position to
emphasize the sound to the right speakers
and
counter-clockwise from the center click-stop
position to emphasize the sound to the left
speakers.
The
center
click-stop
position
provides
an
equal emphasis
to
both left
and
right
speakers. After the adjustment
is
made, push
the knob back into
the
original position.
Treble
Depress
the
treble
knob and it will
spring
outward so that the treble can be adjusted.
Rotate the knob clockwise from the center
click-
stop position to increase the treble. Turn it
counter-clockwise from the center click-stop
position
to
decrease
the
treble.
After
the
adjustment
is
made, push the knob back into its
original position.
Bass
Depress the bass knob
and
it will spring outward
so
that the bass
can
be
adjusted. Rotate the
knob
clockwise
from
the
center
click-stop
position
to
increase the bass. Turn
it
counter-
clockwise from the center click-stop position to
decrease the bass. After the adjustment is
made, push the knob
back
into its
original
pOSition.
NOTE!
When
using
the
seven-band
graphic
equalizer,
the
bass
and
treble
settings
should
be
left
in
the
center
click-stop
position
for
best performance.
Tuning
Use
the Tuning Mode (T'MODE) switch
to
select
Manual,
Seek, or Scan tuning. The display
panel
will indicate either SEEK or
SCAN
when
those modes are selected. A blank display
indicates manual mode.
Manual tuning is accomplished by pressing
the
v or A switches. The v switch
lowers the frequency. The
A switch raises
the frequency.
In
the
Seek
Tuning
mode, the
radio
automatically seeks out the next clear station
when the
v or A switch is depressed.
Use
the v switch to seek to the next clear
lower frequency station, the
A switch
to
seek
the next clear higher station.
Scan
Tuning
is
started
by
depressing either the
v or A switches. The radio will automatically
scan for the next medium-to-strong frequency
and
play for a
few
seconds before continuing
on
to the next. Scanning can
be
stopped at any
desired station simply
by
depressing the same
switch again during the pause.