Removing
Discs
From
The
Magazine
When a disc
has
been loaded into the magazine
the
disc
lever
(white)
on
the
back
of
the
magazine will
be
extended from the magazine
edge
as
shown below:
To eject the disc from the magazine,
move
the
D,sclever
r1l
lever
toward
the edge of the
magazine
as
indicated by the arrow in the drawing. This
action will cause
th'e
disc
to
be
partially ejected.
Grasp the edge of the disc
as
shown, gently
remove it
and
return
it
back
to
its jewel case.
Loading The Magazine Into The
Changer
Viewing the changer so that the SAAB logo
appears right side
up,
slide the magazine door
to
the right (open). Insert the magazine
so
that
the
"UP"
arrow
on the face of the magazine is
pointing away from the disc indicator panel.
Depress
magazine
until
you
hear
the
mechanism lock into place. Disc indicator lights
Compact
Disc
Autochanger
Features
and
Operation
(Optional)
31
will begin
to
flash indicating magazine
is
properly
loaded.
The changer will then search the magazine to
determine which disc locations have been
Sliding
door
loaded.
When
complete,
the
changer
will
illuminate the disc indicators corresponding to
the loaded slots.
NOTE!
Changer controls
on
dash mounted unit
will
not
function
until
changer
has
completed
th~~isc
S!,~~!:.~~~~~!:.~~~.:_~
....... ,
Once the magazine
has
been
loaded, slide
the
door back
to
the
left (closed).
CAUTION!
1.
00
not
leave the magazine door open
at
any time other than during magazine
loading
and
unloading. Oebris may fall
into
the
mechanism
and
eventually
cause damage.
2. Take care when loading
and
unloading
the magazine
dur,ing
inclement weather
as
excessive moisture .inside the unit
may damage the mechanism. , ' ,
3.00
not
,insertnioretharionediscintp':
one
disc,
compiutrnent,
Cis
'darnageio
i
both
disc
andmaga'zineV\lilHesult
.,.
4.
We
recommeI:1d
the, use
of
the Ilrotec:,?
tive cover (part number 0247940) when- "
ever
you
are
not
changing
theCO"
changer
magazine..
..•
To Next Page