Dual
Motor
Cassette
Drive
One
motor
is
used
to
perform
non-critical
functions such
as
fast forward, rewind
and
tape
load /unload. The second motor is
used
solely
to
drive
the
tape
during
playback.
This
dedicated playback motor
is
computer controlled
to
accurately control speed under
all
operating
conditions, thereby providing superior playback
performance.
Cassette
Power
Off
Eject
System
Protects tape
and
tape player from damage
by
automatically ejecting the tape when power
is
turned
off.
Cassette AutoReverse, Automatic
Program
System
Cassette will automatically reverse
at
the
end
of
the tape or can
be
manually reversed at any
point during play. Automatic
Program System
(APS)
permits replay
of
the current selection
or
advancing
on
to
the next. '
Tape
Requires
Cleaning
Indicator
The unit will automatically indicate when it
is
time to clean the tape head
and
cassette drive
components.
Night
Illumination
All
switches
and
controls are illuminated for night
viewing.
A
photocell
is
built
into
the
face
of the
cassette/receiver. It controls the brightness
of
the
display
functions
on all
audio
system
components according to ambient lighting.
Automatic
Antenna
Circuit
When
the radio
is
turned
on,
the electric antenna
automatically extends. When the radio
is
turned
off,
the
antenna automatically retracts.
CAUTION!
When
entering
an
automatic car wash,
be
sure to turn the radio off. If the car is
driven through the car wash with the
antenna extended, the antenna might
be
damaged.
Introduction
5
To Next Page