IGNITION AND
GEAR
(SELECTOR) LEVER LOCK
The ignition and gear lock key also fits all
other
locks
in the car. The key number is stamped
to
the plastic
lug at the key grip. Detach and keep the lug so that the
serial number is available
if
the key should be lost. Make
certain that the serial
number
is properly registered on
pageone
of
this Manual in the space provided.
Manual transmission
The ignition and gear lever lock has
four
positions:
L.
When the key is in the L position and reverse
is
en-
gaged, the gear lever is locked and the key can be re-
moved. Parking
lights and flashing hazard warning
lights can
be
switched on.
G. Garage position.
All lights can be used.
K.
Driving position. The entire electrical system, in-
cluding ignition,
is
operative.
S.
Starting position. The key
is
spring loaded so that it
will return to the K position.
NOTE! To ensure that the car isn't left unlocked, there
will be a buzzer activated
if
the
door
is opened with the
key left in the ignition lock.
Automatic transmission
The ignition and gear selector lock has
four
positions:
L-G-K
- S
L.
When the key
is
in the L position and the gear selector
is
in
the P position, the selector
is
locked and the key can
be removed. Parking
lights and flashing hazard warning
lights can be switched on.
G. Garage position.
All lights can be used.
K.
Driving position. The entire electrical system in-
cluding ignition,
is
operative.
S.
Starting position. The key is spring loaded so that it
will return to the
K position. The starter
motor
can
only
be operated if the selector lever
is
in the N
or
P positions.
NOTE! To ensure that the car isn't left unlocked, there
will be a buzzer activated if the
door
is opened
with
the key
left in the ignition lock.
15
To Next Page
Loading...
