SEATS
The backrest and cushion
of
the driver's seat have
thermostat-controlled electric heating elements
that
warm up automatically when the
ignition
is switched
on
.
The thermostat ensures that the heaters are switched
on
only
when the seat
is
cold
and switched
off
when the
temperature exceeds
82°.
Both front seats are adjustable
as
to
legroom, and the
driver's seat can also be adjusted
for
height. The back-
rest angle is
continuously
adjustable in
two
separate
ranges,
upright
and reclining.
Legroom adjustment
Release catch
1,
see illustration, and slide the seat
to the desired position.
1.
Legroom adjustment catch 2. Vertical adjustment handle
(dnver's seat). 3. Backrest angle adjusting knob. 4. Backrest
release (to
drop
backrest forward
or
back). 5. Catch.
Moving the backrest forward (2 Door Models)
Push
down
catch 4 and
drop
the backrest forward.
Backrest angle adjustment
The backrest angle can be
infinitely
adjusted between
driving and resting position
with
knob
3.
(For bedding
down, see under "Luggage and Cargo Space").
Vertical adjustment
The cushion
of
the driver's seat can be raised and lower-
ed and also tilted to the front
or
rear. As the illustration
shows, there are
four
possi ble positions.
Adjustments are made with the handle (see illustration)
at the forward edge
of
the seat. Release the catch by
pushing on the handle and moving it
to
the intermediate
position. The seat can
now
be adjusted
as
follows:
A.
Raised seat. Move the handle back
without
pressing
down
on the seat.
B.
Lowered seat. Move the handle forward, pressing
down
on the seat.
Vertical adjustment of driver's seat
C. Seat tilted back. Move the handle back, pressing
down
on the seat.
D.
Seat tilted forward. Move the handle forward
with-
out
pressing
down
on the seat.
21
To Next Page
Loading...
