SAB AVIO KT84 Tortuga User Manual

IMPORTANT
The turbine version of the KT84 Tortuga is a high-performance model that requires an expert pilot.
If you do not think you have the necessary experience, please contact SAB (support@sabitaly.it).
IMPORTANT
The KIT is "easily" compatible with Lambert Kolibri T 15,25,35 micro turbine. Bigger turbine may require
the fuselage cut.
Use the manual of the electric version following the pages: 5/6/7/9.
INSTALLATION OF THE TURBINE
Install turbine as shown in Fig 1, Fig 2.
KT84_rev01
Page 1
KT84 TORTUGA
TURBINE VERSION

SAB AVIO KT84 Tortuga Specifications

General

Brand	SAB AVIO
Model	KT84 Tortuga
Category	Toy
Language	English

Summary

Installation of the Turbine

Turbine Installation Figures

Install turbine as shown in figures 1 and 2 for correct mounting.

Installation of the Tank

Tank Fitment with Velcro

Add velcro for perfect fit of the tank to the fuselage as shown in Fig 3.

Tank Installation and Securing

Install the tank as shown in Fig 4 and fix with hot glue in the front zone.

Installation of Components

Component Placement Guide

Follow figures 5, 6, and 7 for the correct installation of electronic components.

Recommendations and Pre-flight Checks

Flight Performance and Conditions

Tortuga turbine version flies over 300 km/h. Use two flight conditions for optimal performance.

Center of Gravity and Ignition Checks

Check center of gravity carefully and perform ground ignitions to verify functionality.