SAB goblin 570 kyle stacy edition User Manual

Essential safety precautions for operating the model helicopter.

Guidance on following assembly order and using compounds.

Lists necessary external components and tools for assembly.

Lists required tools, lubricants, and adhesives for building the model.

Step-by-step guide for assembling the right main frame.

Instructions for mounting the battery support components.

Assembly steps for the carbon fiber landing gear.

Instructions for assembling the 60T pulley system.

Steps for assembling the 28T front tail pulley.

Guide to assembling the main rotor radius arms.

Steps for assembling the main rotor center hub.

Instructions for assembling the main blade grips.

Steps for installing the tail servo.

Guide for installing the swashplate servos.

Correct alignment and mounting options for servos.

Final steps for assembling the servos into the frame.

Assembly of the main rotor head system components.

Steps for assembling the swashplate.

Initial adjustments and linkage setup for the head.

Instructions for properly tensioning the motor belt.

Steps for installing the electronic speed controller (ESC).

Guide for installing the flybarless (FBL) system and receiver (RX).

Steps for assembling the tail rotor hub.

Instructions for assembling the tail pitch slider.

Guide for assembling the tail pitch slider links.

Detailed instructions for installing the tail boom.

How to adjust and check the tail belt tension.

Instructions for installing the helicopter canopy.

Information on locating and registering the serial number.

Pre-flight checks and setup procedures.

Guidance on component wear checks and lubrication.

Useful tips for maintenance and repairs.

Lists optional upgrades and accessories for the helicopter.