Follow the following stages to reverse the door from its initial
position�
1� Take o the hinge cover
2� Remove the the upper hinge� Lift the upper door and place it
on a padded surface to prevent it from scratching�
Remove the door block, screw and plastic tube under the
upper door and move them to the opposite side� You may
need to replace the door block to t the opposite side�
3� Take o the middle hinge by removing the screws� Lift the
lower door and place it on a padded surface to prevent it
from scratching�
Remove the screws’ covers and place them to the opposite
side�
Swap the position of the plastic tube and hole cover on top
of the lower door� Remove the door block, screw and plastic
tube under the lower door and move them to the opposite
side� You may need to replace the door block to t the
opposite side�
4948
To Next Page
Loading...
