EasyManua.ls Logo

Saba MOC30MS - Turntable Installation; Installation; Countertop Installation

Saba MOC30MS
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Turntable Installation
Turntable shaft
Turntable ring assembly
Hub (underside)
Glass tray
a� Never place the glass tray upside down� The glass tray should
never be restricted�
b� Both glass tray and turntable ring assembly must always be
used during cooking
c� All food and containers of food are always placed on the
glass tray for cooking
d� If glass tray or turntable ring assembly cracks or breaks, con-
tact your nearest authorized service center
Countertop Installation
Remove all packing material and accessories� Examine the oven
for any damage such as dents or broken door� Do not install if
oven is damaged�
Cabinet: Remove any protective lm found on the microwave
oven cabinet surface�
Do not remove the light brown Mica cover that is attached to the
oven cavity to protect the magnetron�
Installation
1� Select a level surface that provides enough open space for
the intake and/or outlet vents
1)� The minimum installation height is 85cm�
2)� The rear surface of appliance shall be placed against a wall�
Leave a minimum clearance of 30cm above the oven, a mini-
mum clearance of 20cm is required between the oven and
any adjacent walls
3)� Do not remove the legs from the bottom of the oven�
4)� Blocking the intake and/ or outlet openings can damage the
oven�
5)� Place the oven as far away from radios and TV as possible�
Operation of microwave oven may cause interference to your
radio or TV reception�
4544
GB GB

Related product manuals