A warning message will appear telling you that any unsaved data will be lost, but since the disk is
blank, this message is just cautionary. Click on “OK”. The disk format page will be displayed with
messages concerning the progress of the format process.
When the formatting process is completed, you will be returned to the “Maintenance” page. Click
on the “Status” option on the left side, and you will see the “Status” page and the “Application Sta-
tus” should list all applications as “ON” (gure-08).
Your CM1 is now ready to accept les and be used as a wired network attached storage
device (NAS). Now that the CM1’s disk is prepared, you can move on to conguration of
the device as a networked attached storage unit.
To Next Page
Loading...
