EasyManua.ls Logo

Sable SA-HF033 - User Manual

Sable SA-HF033
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
成品尺寸:100*145mm
公差:±1mm
材质:封面128G铜版纸 内页80克书纸
成型方式:装订成册
Question and Answer IconNeed help?

Do you have a question about the Sable SA-HF033 and is the answer not in the manual?

Overview

This document describes the Sable Air Mattress with Built-in Electric Pump, available in models SA-HFO33, SA-HFO46, and SA-HFO47. It serves as a user guide, providing instructions for setup, use, maintenance, and troubleshooting.

Function Description:

The Sable Air Mattress is designed for household use, providing a comfortable and inflatable sleeping surface. It features a built-in electric pump for convenient inflation and deflation, making it easy to set up and store. The mattress is intended for temporary sleeping arrangements and is not a life-saving device or a water toy.

Important Technical Specifications:

  • Product Dimensions: 100 x 145 mm (finished size) with a tolerance of ±1 mm.
  • Material: The cover is made of 128G coated paper, and the inner pages are 80G book paper.
  • Formation Method: Bound into a book.
  • Voltage:
    • AC 110-120V for US / CA
    • AC 220-240V for EU / UK
    • AC 100V for Japanese specifications
  • Inflation/Deflation Time: Approximately 3 to 5 minutes for full inflation.
  • Pump Usage: The pump should not be used continuously for more than 10 minutes; allow at least 5 minutes of rest after 10 minutes of continuous use.
  • Repair Patch: Included with models SA-HFO33 and SA-HFO46 (not included with SA-HFO47).

Usage Features:

  • Easy Setup: The air mattress unrolls from its carry bag. Before inflation, ensure the extra safety valve is securely closed by firmly pushing the tab down.
  • Built-in Electric Pump: To inflate, open the cord storage holder, plug the cord into a power source, and turn the knob clockwise to the "INFLATE" position. Once fully inflated, turn the knob counterclockwise to "OFF" to stop the motor and return the cord to its holder.
  • Effortless Deflation: To deflate, ensure nothing is on the mattress. Remove the cord, plug it into a power source, and turn the knob counterclockwise to the "DEFLATE" position. After deflation, turn the knob to "OFF" and store the cord. Open the air valve to release any remaining air, then roll up the mattress for storage.
  • Portability: Comes with a carry bag for easy transport and storage.
  • Temperature Adaptability: The air volume inside the mattress may vary with ambient temperature; re-inflate if necessary.
  • Safety Precautions:
    • Do not allow sand, gravel, or small objects to enter the inflation/deflation ports.
    • Keep the pump unblocked at all times.
    • Never insert hands or fingers into the inflation/deflation ports.
    • Avoid using the product near hot objects (e.g., electric stoves, ovens) to prevent melting.
    • Do not stand, walk, or jump on the air mattress.
    • Not a toy; keep children from playing on it to prevent falls or damage.
    • Risk of suffocation for infants: Never place infants aged birth to 15 months to sleep on this inflatable mattress.
    • Keep pets off or away from the air mattress.
    • Keep away from sharp objects to prevent damage.
    • Do not drag the deflated air mattress on the ground.
    • Do not rub the folding places during storage.
    • Store in a well-ventilated place, away from humidity and direct sunlight.

Maintenance Features:

  • Cleaning: Wipe the air mattress with a damp cloth and allow it to air dry after cleaning.
  • Storage: Remove any sheets from the air mattress when not in use. Store the product in a well-ventilated place, away from humidity.
  • Troubleshooting Air Leakage:
    • First, check if the extra safety valve is securely tightened.
    • To locate a leak, listen closely or run your hand over the mattress. If unsuccessful, wipe the inflated mattress with mild soapy water; bubbles will form at the leak site. Do not submerge the mattress in water.
    • Clean the leaking area thoroughly, dry it completely, and deflate the mattress.
    • Cut a suitable size repair patch and press it firmly over the leaking area.
    • Wait 1 hour before re-inflating the mattress.
    • Note: The repair patch only adheres to PVC surfaces.
  • PVC Smell: A new air mattress may have a PVC smell, which typically dissipates within 1 to 2 days.

Customer Service:

  • 12-month warranty.
  • Lifetime support.
  • For further problems, contact customer support; responses are typically provided within 24 hours.

Sable SA-HF033 Specifications

General IconGeneral
BrandSable
ModelSA-HF033
CategoryIndoor Furnishing
LanguageEnglish

Related product manuals