To Next PageTo Next Page
Need help?Do you have a question about the Sabo 107-16 HF and is the answer not in the manual?
Attaching left and right deck arms to the cutting deck's front corners using screws and washers.
Placing the cutting deck, removing locking pin, threading deck arms onto steering knuckle, and attaching V-belt.
Adjusting the cutting height between fixed positions, typically 30 to 85 mm, on a firm surface.
Recommendations for optimal 'Mulch' effect, including frequent cutting, full revs, deck cleaning, and sharp blades.
Procedures before maintenance: stationary machine, parking brake, disengaging drive, shutting off engine, and removing spark plug cable.
Lubricating deck arms with grease nipples every 25 hours of operation or once per season with universal grease.
Tips for easier cleaning and maintenance, including folding up the cutting deck to a vertical position.
Rinsing the underside of the cutting deck after each use and scraping if grass is dried solid. Touch up with paint if needed.
Information about the positive drive belt powering both blades and checks after collision to ensure blades are at right angles.
General| Brand | Sabo |
|---|---|
| Model | 107-16 HF |
| Category | Lawn Mower |
| Language | English |
