Need help?Do you have a question about the Sabre Vision 3 and is the answer not in the manual?
Details composition and quality standards for breathable air used with the apparatus.
Specifications for compressed air airline supplies, including pressure and airflow.
Factors influencing the nominal duration of the breathing apparatus.
Specifies mandatory training requirements for personnel using breathing apparatus.
Details scheduled servicing intervals and personnel qualifications for apparatus.
Information on obtaining spare parts and accessories from Customer Services.
Details the warranty period and conditions for manufactured products.
Lists the notified bodies involved in the certification of the apparatus.
Provides a general description of the Vision 3 positive pressure full face mask.
Visual inspection of facemask, visor, and head-harness for condition and completeness.
Procedures for performing pre-use operational tests on the facemask.
Instructions for fitting and testing facemasks with a web harness.
Instructions for fitting and testing facemasks with a net harness.
Procedure to check the demand valve first breath mechanism operation.
Procedure to verify positive pressure within the facemask.
Reference to perform tests detailed in associated breathing apparatus user instructions.
Steps for correctly attaching the demand valve to the facemask.
General procedure and fitting for donning the facemask.
Procedure for donning facemasks equipped with a web harness.
Procedure for donning facemasks equipped with a net harness.
Check demand valve activation and normal breathing after donning.
Verify positive pressure by checking for outward air flow under the faceseal.
Procedure to check for leaks by holding breath and listening for air loss.
Check for steady airflow into the mask by turning on the DV bypass knob.
Detailed instructions for washing, rinsing, and drying the facemask.
Procedure for recording test details in the Breathing Apparatus Logbook.
Guidelines for storing the mask in a clean, dry environment.
Carry out tests as per Section 3 and record details in the logbook.
Requirements for annual workshop service and major six-yearly workshop service.
General| Brand | Sabre |
|---|---|
| Model | Vision 3 |
| Category | Diving Instrument |
| Language | English |
To Next Page
