Sabrent TV-USBHD User Manual

Sabrent TV-USBHD HYBRID USB HDTV TV TUNER WITH FM RADIO & REMOTE CONTROL
(ATSC DIGITAL/CLEAR QAM/NTSC ANALOG)
Driver Installation:
1. Connect your TV-USBHD dongle into an open USB 2.0 port on your computer.
2. Insert the software disc into your computer’s disc drive. When prompted, click on Run AUTORUN.EXE:
3. Click on Install Driver:
4. When prompted click on Install Driver:
All manuals and user guides at all-guides.com
all-guides.com

Sabrent TV-USBHD Specifications

General

Interface	USB 2.0
Included Software	ArcSoft TotalMedia
TV Tuner Type	ATSC/NTSC
Video Input	Coaxial
Compatibility	Windows

Summary

Driver Installation

Connecting and Running Setup

Connect the dongle and run the autorun.exe from the software disc.

Installing the Driver

Click on 'Install Driver' to initiate the driver installation process.

Verifying Driver Installation

Confirm successful driver installation by checking Device Manager.

BlazeVideo HDTV Player Installation and Setup

Initiating Player Installation

Start the Blaze HDTV Player installation from the software.

Player Setup Wizard: Language and License

Select language and accept the license agreement in the setup wizard.

Player Setup Wizard: Folder and Installation

Select the Start Menu folder and proceed with the installation.

Completing Player Installation and Registration

Finish the installation and register the BlazeDTV software.

Configuring TV Input and Channels

Select input source, signal type, and scan for channels to watch TV.

Final Usage Confirmation (BlazeDTV)

Confirm that TV can now be watched.

ArcSoft TotalMedia 3.5 Installation and Configuration

TotalMedia 3.5 Installation Process

Install TotalMedia 3.5 by running setup and following wizard steps.

TotalMedia 3.5 Setup: License and Customer Info

Accept the license agreement and enter customer information.

TotalMedia 3.5 Setup: Destination and Finish

Choose the destination folder and complete the installation.

Configuring TotalMedia 3.5 for TV Viewing

Select TV mode, region, devices, signal, and scan channels for viewing.

Final Usage Confirmation (TotalMedia)

Confirm that TV can now be watched using TotalMedia.