To Next PageTo Next Page
Need help?Do you have a question about the Sabrent USB-AVCPT and is the answer not in the manual?
Insert the software disc and run the HAutorun.exe to begin the driver installation process.
Click on the 'Install Driver' prompt to start the driver installation wizard.
Proceed with the installation by clicking 'Install' when the wizard indicates it's ready.
Address Windows Security prompt by selecting 'Install this driver software anyway'.
Finish the driver installation by clicking 'Finish' on the completion screen.
Restart the computer and then plug the USB-AVCPT device into a USB port.
The driver installation utility finalizes, and Device Manager is used to verify correct installation.
Instructions for installing the driver on Windows Vista and Windows 7 operating systems.
Connect the device and open Device Manager via the Start menu search.
Verify the USB 2.0 Video Capture Controller entry in Device Manager for proper installation.
Download the latest driver from the provided URL and extract the zip file contents.
Right-click the setup file and select 'Run as administrator' to start the installation.
Click 'Install' to begin the Ulead VideoStudio installation wizard.
Approve the driver installation by clicking 'Install' on the Windows Security prompt.
Finish the Ulead VideoStudio installation and verify the device in Device Manager.
Insert the software disc and run the HAutorun.exe to begin the VideoStudio installation.
Choose the 'Install Video Studio' option from the initial software installation menu.
Select the desired language for the Ulead VideoStudio installation process.
Click 'Next' to advance through the Ulead VideoStudio setup wizard.
Review and accept the End User License Agreement to continue the installation.
Provide name, company, and serial number for Ulead VideoStudio registration.
Choose the folder where Ulead VideoStudio program files will be installed.
Select the user's country and the appropriate video standard (NTSC/PAL).
Review installation settings and start copying Ulead VideoStudio program files.
Select to restart the computer to finalize the Ulead VideoStudio installation.
Launch the Ulead VideoStudio application and open the VideoStudio Editor.
Set the video source to 'USB2.0 Grabber' for capturing video.
Configure input source, TV system, and audio device for optimal capture.
Click 'Capture Video' to begin the video recording session.
Guides users on how to find or resolve issues with the serial number for the software.
Instructions to find the serial number by locating a specific file on the software disc.
Explains how to change the capture format to MPEG to reduce large AVI file sizes.
Navigate to advanced settings to adjust MPEG parameters for video capture.
Choose a DVD NTSC template (720x480) from the MPEG settings for optimal quality.
Confirm the selected MPEG settings by clicking OK in the properties window.
Discusses limitations of using the device with third-party applications.
Guides users to adjust compression settings to fix black and white video preview issues.
Change the video compression format to 'I420' to resolve black and white preview problems.
General