SABROE ATLAS V316 User Manual

2
W A R N I N G
We draw attention to the fact that cleaning and flushing
with steam or hot water of compressors, condensers, tanks,
cooling units and other parts of a refrigeration plant fil-
led wi th refrigerant may cause a violent explosion, for
which reason it is high ly dangerous.
Moreover, tanks and cooling coils which may be filled with
refrigerant in liquid form, must never be completely closed
before making sure that the units in question are not com-
pletely filled up with the liquid.
The drums of the ice machines connected to pump plants might
inadvertently be completely filled with refrigerant. At rise
of temperature, the generated pressure can burst the drum.
Consequently, these ice machines should always be provided
with a relieve valve.
In order to give the drum surface the best corrosion resist-
ance possibie i t is coated wi th a thin metal layer. This
layer is resistant to the ice scraping, but cannot stand
sporadic mechanical stress from hard objects. Consequently,
it is important to check that the knife does not touch the
drum at ambient temperature, just as blows etc. on the drum
surface must be avoided.

SABROE ATLAS V316 Specifications

General

Brand	SABROE
Model	ATLAS V316
Category	Ice Maker
Language	English