What to do if the oil temperature is over 160F in my SAC Truck?
If the oil temperature in your SAC Truck exceeds 160F, you should check the oil coolers and oil level. Alternatively, consider reducing the operation speed and/or load.
How to troubleshoot no oil temperature detected warning on SAC 3600?
If your SAC Truck displays a 'No Oil Temperature Detected' warning, inspect the wires and oil temperature sensor. Also, verify that the oil temperature is adequate for operation.
How to fix a front charge pressure filter bypass condition on SAC 3600?
If a 'Front Charge Pressure Filter Bypass Condition Exists' warning appears on your SAC Truck, change the charge pump filters.
What should I do if the rear charge pressure filter bypass condition exists in SAC 3600?
If you receive a 'Rear Charge Pressure Filter Bypass Condition Exists' warning on your SAC Truck, replace the charge pump filters.
What to do if there is low charge pressure on the front charge pump of my SAC Truck?
If your SAC Truck indicates 'Low Charge Pressure on Front Charge Pump', inspect the pump and sensor for any damage. If the pump pressure is okay, press OK to resume operation.
What should I do if there is low pressure on the rear charge pump in SAC 3600 Trucks?
If your SAC Truck warns of 'Low Pressure on Rear Charge Pump', examine the pump and sensor for damage. If the pump pressure is adequate, press OK to continue operation.
What to do if no speed is detected from the front auger on SAC 3600 Trucks?
If your SAC Truck shows a 'No Speed Detected from Front Auger' warning, examine the speed sensor and wiring.
What to do if no speed is detected from the rear auger on SAC 3600?
If you receive a 'No Speed Detected from Rear Auger' warning on your SAC Truck, check the speed sensor and wiring.
What should I check if the charge pump 2 pressure sensor has high voltage output on SAC Trucks?
If your SAC Truck displays a 'Charge Pump 2 Pressure Sensor has High Voltage Output' warning, inspect the sensors and wiring.
What to do if charge pump 1 pressure sensor has low voltage output on SAC 3600 Trucks?
If your SAC Truck indicates 'Charge Pump 1 Pressure Sensor has Low Voltage Output', check the sensors and wiring.
General operating principles and advice for the mixer.
Critical warnings for safe operation and to prevent injury or death.
Section to record mixer and component serial numbers for easy reference.
Explains DANGER, WARNING, CAUTION to convey hazard levels.
Critical safety rules to follow while operating the mixer.
Safety procedures and precautions to follow during maintenance.
Step-by-step instructions and safety for maintenance tasks.
Chart of torque values for various bolt sizes and grades.
Essential checks before operating the mixer.
Explanation of the mixer's control console and display layout.
Detailed explanation of mixer operation and system functions.
Diagnosing and resolving common operational issues.
Location and identification of fuses and relays in the panel.
Location and upkeep of the hydraulic oil reservoir.
Recommended engine and auger speeds for mixing.
Step-by-step guide for mixing feed ingredients.
Key checks and adjustments for proper mixer function.
Recommended hydraulic oil and service intervals.
Procedures for maintaining and replacing auger knives.
Steps for replacing the auxiliary hydraulic circuit filter.
Procedures for changing hydraulic oil and cleaning the reservoir.
Capacity, dimensions, and requirements for 36 series mixers.
Warranty coverage for the SAC 3600 series mixer.
To Next Page
General