To Next PageTo Next Page
Need help?Do you have a question about the SAC SE SERIES and is the answer not in the manual?
General| Brand | SAC |
|---|---|
| Model | SE SERIES |
| Category | Transmitter |
| Language | English |
Explains the readings and functions of the upper and lower analog meters.
Describes the layout, keys, LEDs, and basic functions of the master control keypad.
Outlines the sequence of screens displayed during system startup and initialization.
Explains how to select the primary transmitter and choose display/control.
Procedures for configuring the transmitter's operating frequency, tone, and call sign.
Guides setting the transmitter mode, output power, and modulation level.
Details steps for calibrating RF output, power, and modulation parameters.
Steps for configuring network IP addresses and location site names.
Procedures for setting time, enabling monitor, DCAD, and viewing transmitter data.
Lists necessary test equipment and initial connection procedures for checks.
Procedures for checking power, modulation, frequency, and ID for Transmitter 1.
Procedures for checking power, modulation, frequency, and ID for Transmitter 2.
Covers various tests for fault conditions like loss of tone, modulation, power, and VSWR.
Tests the proper functioning of the Morse code identifier transmission.
