Need help?Do you have a question about the Sachtler DV 6 and is the answer not in the manual?
Adjusts pan bar position for operation and transport.
Procedure for ensuring the fluid head is level using the bubble.
Attaching cameras or plates using the Touch & Go system.
Securing camera, balancing, and adjusting drag for stability.
Adjusts fluid damping levels for smooth tilt and pan movements.
Function and use of horizontal (pan) and vertical (tilt) brakes.
Details the included pan bar and ordering an additional one.
Information on different camera plates (DV 2, DV 2 C.O.G., DV 8) for mounting.
General| Load Capacity | 6 kg |
|---|---|
| Pan Range | 360° |
| Tilt Range | +90° / -75° |
| Base Diameter | 100 mm |
| Sliding Range | 100 mm |
| Head Fitting | 75 mm bowl |
| Material | Aluminum |
| Camera Fitting | 3/8" screw |
| Legs | Not applicable |
To Next Page