42
ENGLISH
3
Put a “Co ee Oil Remover” tablet in the pre-ground co ee compart-
ment.
Green
4
Press the “ ” button one or more times to select the pre-ground cof-
fee function without adding ground co ee to the compartment.
5
Press the “ ” button to start a co ee brewing cycle.
6
Wait until the machine has dispensed half a cup of water.
7
Remove the plug of the power cord from the wall socket.
8
Let the solution take e ect for approximately 15 minutes. Make sure
you discard the dispensed water.
9
Reinsert the plug of the power cord into the wall socket.
Turn on the machine by pressing the “
” button.
Wait for the automatic rinse cycle to be completed.
10
Remove the co ee grounds drawer and open the service door. Remove
the co ee residues drawer and then the brew group.
To Next Page
Loading...
