14
ENGLISH
Manual Rinse Cycle
During this process you activate the co ee brewing cycle and fresh water
ows through the steam/hot water circuit. This takes a few minutes.
1
Place a container under the co ee dispensing spout.
2
Check that the machine shows this display.
Green
3
Select the pre-ground co ee brewing function by pressing the “ ”
button. The machine shows this display.
Note:
Do not add pre-ground co ee into the compartment.
4
Press the “ ” button. The machine starts dispensing water.
5
When the dispensing has nished, empty the container. Repeat the
operations from step 1 to step 4 twice, then continue with step 6.
Green
6
Place a container under the steam wand.
To Next Page
Loading...
