What to do if my Saeco Moltio HD8869 Coffee Maker shows the red icon is always displayed?
If the red icon is always displayed on your Saeco Coffee Maker, it means the coffee grounds drawer must be emptied with the machine off. Wait until the icon is displayed before refitting the drawer.
Why does coffee leak out of the coffee dispensing spout on my Saeco Moltio HD8869?
If coffee leaks from the dispensing spout of your Saeco Coffee Maker, it is likely that the coffee dispensing spout is clogged. Clean the coffee dispensing spout and its holes. Another possibility is that the selector switch is blocked. Move the selector switch back and forth until the coffee beans are released.
How to fix the brew group if it cannot be removed from my Saeco Coffee Maker?
If the brew group cannot be removed from your Saeco Coffee Maker, it might be out of place. Turn on the machine and close the service door; the brew group should automatically return to the initial position. Also, make sure to remove the coffee grounds drawer before attempting to remove the brew group.
How to fix the brew group if it cannot be inserted into my Saeco Moltio HD8869 Coffee Maker?
If the brew group cannot be inserted into your Saeco Coffee Maker, ensure it is in the off position. If it is still not working, the gearmotor might not be in the correct position. Insert the drip tray and coffee grounds drawer, close the service door, and turn on the machine without the brew group. The gearmotor will move to the correct position. Then, turn off the machine and reinsert the brew group.
What to do if my Saeco Moltio HD8869 grinds coffee beans but no coffee comes out?
If your Saeco Coffee Maker grinds beans but no coffee is dispensed, it could be due to several reasons. First, ensure that the water tank is filled and the circuit is primed. A dirty brew group or coffee dispensing spout can also cause this issue, so clean them thoroughly. Additionally, the circuit might not be primed, so try priming it.
Why is coffee brewed slowly in my Saeco Moltio HD8869 Coffee Maker?
If your Saeco Coffee Maker brews coffee slowly, the coffee grind might be too fine. Consider changing the coffee blend or adjusting the grinder. Clogged circuits can also cause slow brewing, so perform a descaling cycle. Additionally, ensure the circuit is primed and the brew group is clean.
Why does my Saeco Moltio HD8869 Coffee Maker coffee not taste like the new coffee beans?
If the coffee from your Saeco Coffee Maker does not taste like the new coffee beans, the coffee outlet duct and grinder might not have been emptied. You need to brew at least two cups of coffee before you can taste the new coffee beans.
What does it mean when the icon is shown on my Saeco Moltio HD8869?
If the icon is displayed on your Saeco Coffee Maker, the coffee bean hopper selector switch might have shifted. Move the selector switch to the correct position. Also, the coffee bean hopper and tray might be dirty, so clean them to remove any coffee residues. The machine may also be in demo mode; disconnect the power cord and turn the machine back on.
Why is the milk not frothed by my Saeco Coffee Maker?
If your Saeco Coffee Maker is not frothing milk, the milk carafe may be dirty or not inserted correctly. Clean the carafe and ensure it is properly inserted. Also, check that the milk dispensing spout has been removed correctly. The type of milk used might also be unsuitable for frothing, so use the type of milk suggested.
What to do if Saeco Moltio HD8869 coffee does not have enough crema?
If your Saeco Coffee Maker isn't producing enough crema, the coffee blend might be unsuitable, not freshly roasted, or the grind might be too coarse. Consider changing the coffee blend or adjusting the grinding settings.
Guidance on the safe use and handling of the power supply cord.
Identification and description of the machine's components and parts.
Detailed explanation of all machine parts and their functions.
Information on keeping the original packaging for transport and storage.
Guidance on placing the machine on a suitable surface and connecting it.
Procedure to fill the machine's internal circuit with water and warm it up.
Machine performs an automatic rinse of internal circuits with fresh water.
Procedure to activate brewing cycle and flush water through the water circuit.
How to measure water hardness using a test strip for optimal settings.
Guide to installing the INTENZA+ water filter for limescale prevention.
Instructions for replacing the INTENZA+ water filter when needed.
Step-by-step instructions to safely detach the coffee bean hopper.
Guide on how to correctly re-attach the coffee bean hopper.
Optimizing grinding based on selected coffee bean type (Arabica, Robusta, Mixed).
Procedure to empty coffee outlet duct and grinder before changing beans.
Explanation of the machine's self-adjusting system for coffee extraction.
How to adjust the coffee grind coarseness for personal taste.
Setting the amount of coffee for desired coffee strength.
Modifying the height of the spout to fit different cup sizes.
Programming the desired amount of brewed coffee for each button.
Step-by-step guide to brewing espresso or coffee using whole coffee beans.
How to brew espresso or coffee using pre-ground coffee.
Instructions for filling the milk carafe with milk.
Step-by-step guide to correctly insert the milk carafe into the machine.
Instructions for safely detaching the milk carafe from the machine.
How to empty and clean the milk carafe after use.
Personalizing the amount of cappuccino brewed into the cup.
Customizing the dispensed amount of Latte Macchiato.
Personalizing the preset amount of frothed milk dispensed into the cup.
Essential daily cleaning tasks for the coffee machine.
How to clean and maintain the water tank and its filter.
Procedures for daily cleaning of the milk carafe and its components.
Tasks for thorough weekly cleaning of the main machine parts.
Detailed disassembly and cleaning of the milk carafe for thorough maintenance.
Procedure for cleaning the brew group, including its removal and reassembly.
Using Saeco Milk Circuit Cleaner for a deep clean of the milk system.
Applying grease to the brew group for smooth operation and longevity.
Using Coffee Oil Remover tablets for a thorough cleaning cycle.
Overview of customizable functions available in the programming menu.
Customizing the coffee brewing temperature for optimal taste.
Configuring the machine's automatic switch-off time to stand-by mode.
Setting water hardness based on local water quality for proper functioning.
Adjusting the display contrast for better readability of messages.
Managing the INTENZA+ water filter settings via the menu.
Initiating the descaling cycle through the programming menu.
Optimizing grinding for specific coffee bean types.
Performing an emptying cycle for the coffee outlet and grinder.
Resetting all machine settings to their original factory values.
Step-by-step guide to navigating the programming menu and adjusting settings.
Icons indicating the machine is ready for brewing or specific operations.
Icons indicating machine status, errors, or required actions.
Icons indicating critical errors, out-of-order status, or immediate actions.
Information regarding the product's warranty coverage and terms.
How to get help, register product, and contact support for service needs.
Details on the machine's energy consumption and automatic shut-off.
Guidance on the safe use and handling of the power supply cord.
Identification and description of the machine's components and parts.
Detailed explanation of all machine parts and their functions.
Information on keeping the original packaging for transport and storage.
Guidance on placing the machine on a suitable surface and connecting it.
Procedure to fill the machine's internal circuit with water and warm it up.
Machine performs an automatic rinse of internal circuits with fresh water.
Procedure to activate brewing cycle and flush water through the water circuit.
How to measure water hardness using a test strip for optimal settings.
Guide to installing the INTENZA+ water filter for limescale prevention.
Instructions for replacing the INTENZA+ water filter when needed.
Step-by-step instructions to safely detach the coffee bean hopper.
Guide on how to correctly re-attach the coffee bean hopper.
Optimizing grinding based on selected coffee bean type (Arabica, Robusta, Mixed).
Procedure to empty coffee outlet duct and grinder before changing beans.
Explanation of the machine's self-adjusting system for coffee extraction.
How to adjust the coffee grind coarseness for personal taste.
Setting the amount of coffee for desired coffee strength.
Modifying the height of the spout to fit different cup sizes.
Programming the desired amount of brewed coffee for each button.
Step-by-step guide to brewing espresso or coffee using whole coffee beans.
How to brew espresso or coffee using pre-ground coffee.
Instructions for filling the milk carafe with milk.
Step-by-step guide to correctly insert the milk carafe into the machine.
Instructions for safely detaching the milk carafe from the machine.
How to empty and clean the milk carafe after use.
Personalizing the amount of cappuccino brewed into the cup.
Customizing the dispensed amount of Latte Macchiato.
Personalizing the preset amount of frothed milk dispensed into the cup.
Essential daily cleaning tasks for the coffee machine.
How to clean and maintain the water tank and its filter.
Procedures for daily cleaning of the milk carafe and its components.
Tasks for thorough weekly cleaning of the main machine parts.
Detailed disassembly and cleaning of the milk carafe for thorough maintenance.
Procedure for cleaning the brew group, including its removal and reassembly.
Using Saeco Milk Circuit Cleaner for a deep clean of the milk system.
Applying grease to the brew group for smooth operation and longevity.
Using Coffee Oil Remover tablets for a thorough cleaning cycle.
Overview of customizable functions available in the programming menu.
Customizing the coffee brewing temperature for optimal taste.
Configuring the machine's automatic switch-off time to stand-by mode.
Setting water hardness based on local water quality for proper functioning.
Adjusting the display contrast for better readability of messages.
Managing the INTENZA+ water filter settings via the menu.
Initiating the descaling cycle through the programming menu.
Optimizing grinding for specific coffee bean types.
Performing an emptying cycle for the coffee outlet and grinder.
Resetting all machine settings to their original factory values.
Step-by-step guide to navigating the programming menu and adjusting settings.
Icons indicating the machine is ready for brewing or specific operations.
Icons indicating machine status, errors, or required actions.
Icons indicating critical errors, out-of-order status, or immediate actions.
Information regarding the product's warranty coverage and terms.
How to get help, register product, and contact support for service needs.
Details on the machine's energy consumption and automatic shut-off.
General| Coffee Strength Settings | Yes |
|---|---|
| Weight | 8.5 kg |
| Power | 1500 W |
| Built-in Grinder | Yes |
| Adjustable Grinder Settings | Yes |
| Number of Grinder Settings | 5 |
| Milk Tank | Yes |
| Removable Brewing Unit | Yes |
| Removable Water Tank | Yes |
| Removable Drip Tray | Yes |
| Pump Pressure | 15 bar |
| Number of Coffee Strengths | 5 |
| Adjustable Coffee Quantity | Yes |
| Milk Frother | Yes |
| Programmable | Yes |
| Automatic Shut-off | Yes |
| Voltage | 230 V |
| Color | Black |
| Cord Length | 1 m |
To Next Page