Press the button and keep
it pressed; when the indica-
tor light is fl ashing, release
the button.
“AQUA PRIMA” CARTRIDGE FILTER
INSTALLATION
The fi lter must be replaced when signalled by the machine.
See “Page 31”.
Before descaling, remove the fi lter from the tank.
Remove the fi lter from the
packing container.
Adjust the dater to the
current month.
Put the fi lter into the empty
tank.
Check where the fi lter
positioning and reference
mark is.
Insert the applicator and
turn it clockwise to secure
it to the fi lter.
The reference must be
positioned in correspon-
dence with the groove.
Press until the end limit. Turn the applicator coun-
ter-clockwise and remove
it from the tank.
Fill the tank with fresh
drinkable water.
Position a container
beneath the steam tube
and turn the machine on.
Press the button to
dispense water.
Open the knob and
dispense water.
Empty the water tank out at
intervals.
When the tank is empty, fi ll
it again with fresh drinkable
water.
You can now use your
coffee machine.
It is possible to use the
machine without fi lter, Saeco
suggests its use. If fi lter is
not used, the machine must
be descaled more frequently.
Adjust the water hardness
(see “programming the ma-
chine functions”).
27
To Next Page
Loading...
